Phospat Secure 1 - Prefilter for Phospat 1

• Reduces phosphates present in water and prevents algae proliferation by supporting the biological filter.
• Suitable for ponds, natural swimming pools and closed circuit fountains.
• Water volume up to 50 m3
• (optimal conditions) and possibility of adding several cartridges for larger volumes of water.

Informations 

- Reduces phosphates in water, prevents algae growth and supports the biological filter

- Suitable for ponds, natural swimming pools and closed circuit fountains

- Absorption capacity up to 90,000 mg of phosphate per cartridge

- Water flow up to 835 l/h, backwashable

- Defined grain size of the different layers

- Suitable for a water volume of up to 50 m3 and possibility of adding several cartridges for larger water volumes

- Withstands a maximum pressure of 4 bars, pressure loss of approximately 0.3 bar.

- Two 1 inch fittings

Filter structure

The aggregates have been specially developed to bind phosphates. The Phospat 1 cartridge is made up of 3 layers. The outer layers protect and secure the central phoslamin layer and ensure smooth flow. Due to its unique composition, large quantities of phosphates are bound quickly and sustainably.

Application

Connect one of the two connections to a pump (maximum flow rate of 835 l/h) and connect the second to a pipe which circulates the water in the basin.

General informations

The water passing through the Phospat 1 cartridge must be pre-filtered because suspended solids can clog the Phosphat 1 and thus considerably limit its effectiveness. Protect Phospat 1 against freezing.

Phospat 3 

- Reduces phosphates present in water and prevents algae proliferation by supporting the biological filter.

- Suitable for ponds, natural swimming pools and closed circuit fountains.

- Water volume of up to 150 m3 (optimal conditions) and possibility of adding several cartridges for larger volumes of water

Informations 

- Reduces phosphates in water, prevents algae growth and supports the biological filter

- Suitable for ponds, natural swimming pools and closed circuit fountains

- Absorption capacity up to 270,000 mg of phosphate per cartridge

- Water flow up to 2500 l/h, backwashable

- Defined grain size of the different layers

- Suitable for a water volume of up to 150 m3 and possibility of adding several cartridges for larger water volumes

- Withstands a maximum pressure of 4 bars, pressure loss of approximately 0.3 bar.

- Two 1 inch fittings

Filter structure

The aggregates have been specially developed to bind phosphates. The Phospat 3 cartridge is made up of 3 layers. The outer layers protect and secure the central phoslamin layer and ensure smooth flow. Due to its unique composition, large quantities of phosphates are bound quickly and sustainably.

Application

Connect one of the two connections to a pump (maximum flow rate of 2500 l/h) and connect the second to a pipe which circulates the water in the basin.

General informations

The water passing through the Phospat 3 cartridge must be pre-filtered because suspended solids can clog the Phosphat 3 and thus considerably limit its effectiveness. Protect Phospat 3 against freezing.