Directions for use: Make sure the filtration and ventilation are in good condition. Respect a period of 10 days between 2 treatments.

1. Before treatment, slow down the pump and stop aeration to allow sedimentation.
2. Calculate the precise dose according to the volume and dilute this dose at least 10 times with water before spreading it over the entire surface of the pond (watering can).
3. Remove the waste that accumulates at the bottom or on the surface and restart the pump, always taking care to ventilate it well.

Caution: It is possible that large quantities of waste are retained in the filter or in the vases. It will be necessary to clean the filter and reseed with Optinit. The normal increase in bacterial activity that follows can lead to reduced oxygen levels, which is dangerous for fish. Treatment should therefore be avoided if the dissolved oxygen level is too low (high heat, storm, non-compliant installations, etc.).

Dosage: 100ml/m3.

Storage: Store between 10 and 25°C. Under normal storage conditions, the product can be kept for 24 months.